About Gamma NDT Academy

Gamma NDT Academy is a training institution in oil and gas industry, providing NDT and QC courses in Kerala. Our training center is located in Thrissur, Kerala

Download our app to join free training

Download Gamma NDT Training App
Follow Us
Coating Inspector
NACE CIP Level I
15 readings
Reading: Use of protective coatings to control corrosion
Reading: Corrosion fundamentals(properties of a coating, coating classification, and modes of protection)
Reading: Coating types and curing mechanisms
Reading: Coating specifications including service environments and coating life cycle
Reading: Surface preparation equipment, methods and standards for tool cleaning
Reading: Coating application by brush, roller, mitt, and conventional and airless spray
Reading: Role and responsibilities of the inspector including safety, ethics, and conflict prevention and decision making
Reading: Inspection procedures and quality control
Reading: Purpose and content of a pre-job conference
Reading: Test instruments for measurement of environmental or ambient conditions
Reading: Non-destructive test instruments
Reading: Testing for non-visible contaminants
Reading: Quality control issues, recognizing design and fabrication defects, and coating failure modes
Reading: Material safety data sheets (MSDS) and product technical data sheets
Reading: Purpose and content of log book and report documentation
NACE CIP Level II
13 readings
Reading: Ÿ Advanced corrosion theory with an introduction to the role of cathodic protection, when used with coatings
Reading: Environmental controls, equipment, and inspection concerns
Reading: Advanced environmental testing instrumentation including digital electronic hygrometers, data loggers, and wind speed monitors
Reading: Centrifugal blast cleaning and water jetting equipment standards, methods of use, and inspection concerns
Reading: Advanced nondestructive test instruments including use and operating parameters for optical and digital microscopes, pH meters, and eddy-current dry film thickness and ultrasonic thickness gauges
Reading: Destructive coating inspection equipment such as paint inspection gauges and adhesion and hardness testers
Reading: Surface preparation, application, and inspection of liquid-applied and thick barrier linings
Reading: Specialized application equipment including plural-component, electrostatic and centrifugal, and hot spray system
Reading: Concrete coating techniques, concerns, and test instruments used for inspection
Reading: Specialized coating techniques and application of non-liquid coatings including powdered coatings, spray metallizing, hot-clip galvanizing, and automated coatings application
Reading: Elements of maintenance coating operations
Reading: Coating survey techniques and procedures and common coating failure modes
Reading: Health and safety awareness in relation to the inspector’s work conditions
B-Gas Grade 1
8 readings
Reading: Offshore structures
Reading: Offshore working
Reading: Safety offshore
Reading: Medical and emergency procedures
Reading: finish colour schedules BS 381C and BS 4800
Reading:
Reading: BS 1710 identification of pipelines
Reading: BS 5378 safety signs and colours
B-Gas Grade 2
7 readings
Reading: Corrosion theory
Reading: surface preparation, surface contaminants and tests
Reading: Paint constituents and technology
Reading: Solutions and dispersions
Reading: Drying, curing properties, performance and specified painting conditions
Reading: Cathodic protection, holiday or pinhole detection, paint-application methods, paint film testing, paint identification, and metal coatings
Reading: Paint faults, colour, inspection methods, specification requirements, and health and safety and working practices

Call us: (+91) 96453 38662

Coating Inspector

₹30,000
Categories:
Coating Inspector Training

About this course

Coating inspection is done on assets like ship, bridge, power plant, oil rig etc. Coating Inspectors ensures that the intended service life of a corrosion protection system provides protection for the assets and maintain the engineered economic value of those assets.

 

Coating Inspector Course Content

 

Certifications:

  • NACE CIP (Level I, II)
  • B-Gas (Grade 2, 1)

 

Course Duration:

  • 2 Months

 

Class size:

  • 40 students

 

Course Fees:

  • NACE CIP (Level I) – Rs 30,000
  • NACE CIP (Level II) – Rs 30,000
  • B-Gas (Grade 2) – Rs 25,000
  • B-Gas (Grade 1) – Rs 25,000

 

Syllabus

NACE CIP Level I

Nace CIP is an intensive and extensive training program. Level 1 is the more intensive of the two NACE CIP certification levels. It is designed to accommodate the inexperienced candidate. Students with prior experience may well exceed some of the stated capability and intent of this course. However, both the the inexperienced candidate and competent basic inspector will benefit from the structured training presented in this course. Upon successful completion of NACE CIP Level 1, participants will have demonstrated the ability to undertake basic coating inspection work under the supervision of a qualified coating inspector.

15 readings
Reading: Use of protective coatings to control corrosion
1 days
Reading: Corrosion fundamentals(properties of a coating, coating classification, and modes of protection)
1 hours
Reading: Coating types and curing mechanisms
1 hours
Reading: Coating specifications including service environments and coating life cycle
1 hours
Reading: Surface preparation equipment, methods and standards for tool cleaning
1 hours
Reading: Coating application by brush, roller, mitt, and conventional and airless spray
1 hours
Reading: Role and responsibilities of the inspector including safety, ethics, and conflict prevention and decision making
1 hours
Reading: Inspection procedures and quality control
1 hours
Reading: Purpose and content of a pre-job conference
1 hours
Reading: Test instruments for measurement of environmental or ambient conditions
1 hours
Reading: Non-destructive test instruments
1 hours
Reading: Testing for non-visible contaminants
1 hours
Reading: Quality control issues, recognizing design and fabrication defects, and coating failure modes
1 hours
Reading: Material safety data sheets (MSDS) and product technical data sheets
1 hours
Reading: Purpose and content of log book and report documentation
1 hours
NACE CIP Level II

13 readings
Reading: Ÿ Advanced corrosion theory with an introduction to the role of cathodic protection, when used with coatings
1 hours
Reading: Environmental controls, equipment, and inspection concerns
1 hours
Reading: Advanced environmental testing instrumentation including digital electronic hygrometers, data loggers, and wind speed monitors
1 hours
Reading: Centrifugal blast cleaning and water jetting equipment standards, methods of use, and inspection concerns
1 hours
Reading: Advanced nondestructive test instruments including use and operating parameters for optical and digital microscopes, pH meters, and eddy-current dry film thickness and ultrasonic thickness gauges
1 hours
Reading: Destructive coating inspection equipment such as paint inspection gauges and adhesion and hardness testers
1 hours
Reading: Surface preparation, application, and inspection of liquid-applied and thick barrier linings
1 hours
Reading: Specialized application equipment including plural-component, electrostatic and centrifugal, and hot spray system
1 hours
Reading: Concrete coating techniques, concerns, and test instruments used for inspection
1 hours
Reading: Specialized coating techniques and application of non-liquid coatings including powdered coatings, spray metallizing, hot-clip galvanizing, and automated coatings application
1 hours
Reading: Elements of maintenance coating operations
1 hours
Reading: Coating survey techniques and procedures and common coating failure modes
1 hours
Reading: Health and safety awareness in relation to the inspector’s work conditions
1 hours
B-Gas Grade 1

8 readings
Reading: Offshore structures
1 hours
Reading: Offshore working
1 hours
Reading: Safety offshore
1 hours
Reading: Medical and emergency procedures
1 hours
Reading: finish colour schedules BS 381C and BS 4800
1 days
Reading:
1 hours
Reading: BS 1710 identification of pipelines
1 hours
Reading: BS 5378 safety signs and colours
1 hours
B-Gas Grade 2

7 readings
Reading: Corrosion theory
1 hours
Reading: surface preparation, surface contaminants and tests
1 hours
Reading: Paint constituents and technology
1 hours
Reading: Solutions and dispersions
1 hours
Reading: Drying, curing properties, performance and specified painting conditions
1 hours
Reading: Cathodic protection, holiday or pinhole detection, paint-application methods, paint film testing, paint identification, and metal coatings
1 hours
Reading: Paint faults, colour, inspection methods, specification requirements, and health and safety and working practices
1 hours